Antistatic bags for electronic components

antistatic bags

Antistatic bags are designed for packaging and storing electrostatically sensitive semiconductor components and circuit boards, providing them with maximum protection.

As an aesthetic package, on the one hand, it can save costs, and on the other hand, it can protect electronic components from static damage. It is the best choice for packaging because it can effectively protect electronic products.

Anti-static bags are partially transparent, which makes their contents visible and eliminates the need for additional labeling. Available in various sizes, the packs as an optimal solution for storage and transportation are an extremely effective, flexible product that easily adapts to your requirements.

In accordance with customer requirements, it can be made in the form of a sheet, roll, package and envelope. Available labeling packages and an extensive palette of colors.









Серия

View

<font><font>Materials</font></font>

Application

Серия S

Density: 920 kg / m3

Thickness: 70 microns.

Gap force:> 10-12 MPa Elongation longitudinal:> 250-300%

Elongation transverse:> 400-500%

Tear Resistance:> 50 N / mm

Surface resistance Rs from 1xE5 to 1x10E11 Ohms.

Cost-effective packaging bags (transparent pink 70 micron thick) for use inside ESD protected areas. They do not generate and do not accumulate a charge, but do not protect against the influence of an external field.

Серия SA

Density: 920 kg / m3

Thickness: 70 microns.

Gap force:> 10-12 MPa Elongation longitudinal:> 250-300%

Elongation transverse:> 400-500%

Tear Resistance:> 50 N / mm

Surface resistance Rs from 1xE5 to 1x10E11 Ohms.

Differs from the S series in the presence of an edge zip latch. Cost-effective packaging bags (transparent pink 70 micron thick) for use inside ESD protected areas. They do not generate or accumulate charge, but do not protect against the influence of an external field.

Серия M

Breaking Strength: 30 MPa

Puncture Resistance: 53 N

Seam Strength: 48 N

Thickness: 0.08 mm +/- 10%

Transparency: 40%

ESD protection: <10 nJ

Surface resistance inside: 10E4 - 10E11 Ohm

Surface resistance outside: <10E11 Ohm

Charge drain time: <0,2 seconds.

Heat soldering parameters: Temperature 150 ° C - 190 ° C, Time 1 - 3.5 seconds, Pressure 200 - 350 KPa.

80 micron gray blue metallized packaging bags for use inside ESD protected areas. High level of protection against electrostatic fields (metal mesh is sprayed between the outer layers of antistatic polyester).

Серия SМ

Breaking Strength: 30 MPa

Puncture Resistance: 53 N

Seam Strength: 48 N

Thickness: 0.08 mm +/- 10%

Transparency: 40%

ESD protection: <10 nJ

Surface resistance inside: 10E4 - 10E11 Ohm

Surface resistance outside: <10E11 Ohm

Charge drain time: <0,2 seconds.

The difference from the M series is the presence of an edge zip latch. 80 micron gray blue metallized packaging bags for use inside ESD protected areas. High level of protection against electrostatic fields (metal mesh is sprayed between the outer layers of antistatic polyester).

Серия SD

Breaking Strength: 54 MPa

Seam strength: 15 lbs, 66 N Thickness: 0.1 mm +/- 10% Internal surface resistance: 1 x 10E4 - 1 x 10E11 Ohm

External surface resistance: 1 x 10E4 - 1 x 10E11 Ohm

Heat soldering temperature: 150 ° C - 200 ° C.

Heat Seal Time: 1 - 4.5 seconds.

Pressure: 200 - 450 KPa.

Heavy-duty metallized bags (shiny opaque up to 100 microns thick) are designed for vacuum packaging.

They have the highest degree of mechanical strength (including vacuum packaging of acute-angle objects). The best moisture resistance during long-term storage of vacuum. Protection against any external electromagnetic and static fields.

Серия

SB

Surface resistance of antistatic bags inside: from 10E10 to 10E12 Ohms.

Surface resistance outside 10E9 to 5X10E11 Ohm Charge drain time: <0.2 sec.

Electrostatic protection: <20 nJ

Thickness: Polyester: 13-15 microns, Antistatic polyethylene: 50-75 microns.

Bubble size: diameter 10 mm, height 5 mm.

Light transmission:> 15%

Antistatic bubble metallized bags are made of a metallized film, laminated foil with an antistatic pink (or other color) bubble film. The material used in metallized bubble antistatic bags has excellent ESD protection properties. It provides good mechanical protection and is partially transparent for easy identification of contents. The robust construction of this material makes it recyclable. The bags may have a zip latch or a valve to close the bags.