Metal, steel screen printing mesh

Screen and silk screen metal mesh

The main properties of the metal mesh for screen printing

• High level of structure accuracy
• Ultra-precise thickness tolerances
• High precision weaving
• High bending strength
• Clean, uniform surface area
• Excellent abrasion resistance
• No static load
• Uniform appearance
• Greater openness of the area
• Convenient to use

Screen mesh production

For the production of metal mesh, only the best raw materials in the world are used. Production facilities of the factory allow to produce yarns up to 15 microns thick. Threads of the highest quality are then woven in specially equipped clean rooms using the most advanced, modern equipment. All manufactured products are thoroughly tested by electronic quality control systems. Our multi-level control systems guarantee unprecedented quality of finished products.

Open coating w Wire diameter d

The two most important BOPP SD mesh variables are coating openness (w) and wire diameter (d).

Example: BOPP SD 50 / 30

50 = mesh openness in microns

30 = wire diameter d in microns

Mesh mesh

The grid mesh determines the number of threads per inch (number of cells):

Mesh = 25,4 mm. / (w / mm. + d / mm.)

Open Area A0

An open area describes the total open area in the grid cells over its entire surface.

The larger the open area, the greater the color bandwidth.

Open Area A0 = (w / w + d) ² x 100%

Example: SD 50 / 30: 39%

Types of grids and their application

A type	Description	Application
BOPPSD	Not calendered / calendared according to customer requirements	Precise screen printing for electronics and solar panels
BOPP SD PLUS	Not calendered / calendared according to customer requirements	The latest generation of screen printing nets at high tension. For the best print quality.
BOPPSDSPLUS	Not calendered / calendared according to customer requirements	Improved rigidity and high stability. High w / d ratio, very thin wire.
BOPPSD XD	Not calendered	Screen printing requiring increased color reproduction, geometry changes, fewer contact points, mesh thickness - 2,5 xd
BOPP GP	Not calendered	Cost-effective screen printing screen, exclusively for printing on glass and ceramics.

Specifications - BOPPSD

Description	Surface openness w pm	Wire diameter d pm	Mesh Per inch	Mesh Per cm	Open area Ao %	Thickness pm	Theoretical paint consumption cm³/m²	Calendered thickness pm	Theoretical consumption of calendered paint cm³/m²	Recommended tension N / cm

224/100	224	100	80	31	48	215 5 ±	103	172	82	~ 40
160/75	160	75	105	43	46	162 4 ±	75	130	60
140/65	140	65	120	49	47	135 5 ±	65	112	52
125/65	125	65	135	53	43	140 4 ±	61	112	49
118/56	118	56	145	57	46	120 3 ±	55	96	44
100/50	100	50	165	67	44	110 2 ±	49	88	39
95/45	95	45	180	71	46	102 2 ±	47	82	38	~ 35
90/40	90	40	200	77	48	90 2 ±	43	72	34
75/36	75	36	230	90	46	80 2 ±	37	64	30
63/36	63	36	250	101	40	80 2 ±	32	64	26
59/32	59	32	280	110	42	68 2 ±	29	54	23
56/36	56	36	270	109	37	80 2 ±	30	64	24
56/32	56	32	300	114	40	68 2 ±	28	54	22
50/30	50	30	325	125	39	62 2 ±	24	50	19	~ 30
50/28	50	28	325	128	41	58 2 ±	24	46	19
40/28	40	28	370	147	35	58 2 ±	20	46	16
40/25	40	25	400	154	38	51 2 ±	19	41	15
40/23	40	23	400	159	40	48 2 ±	19	38	15


100/65	100	65	150	61	37	140 4 ±	51	112	41	~ 40
80/50	80	50	200	77	38	110 2 ±	42	88	34
63/40	63	40	250	97	37	90 2 ±	34	72	27
56/40	56	40	270	104	34	88 2 ±	30	70	24
42/36	42	36	325 K	128	29	76 2 ±	22	61	18
36/28	36	28	400 K	156	32	60 2 ±	19	48	15	~ 35
32/25	32	25	450 K	175	32	54 2 ±	17	43	14
25/25	25	25	510 K	200	25	54 2 ±	14	43	11

300/65	300	65	70	27	68	140 3 ±	95	112	76	~ 30
245/65	245	65	82	32	62	140 4 ±	87	112	70	~ 30
265/50	265	50	80	32	71	110 2 ±	78	88	62	~ 25
90/36	90	36	200	79	51	80 2 ±	41	64	33	~ 25

Specifications - BOPP SD PLUS

Description	Open surface w pm	Wire diameter d pm	Mesh Per inch	Mesh Per cm	Open area A %	Thickness pm	Theoretical paint consumption cm³/m²	Thickness Calendaring Ovannaya pm	Theoretical consumption of calendaring paint cm³/m²	Recommended tension N / cm
SD PLUS 98 / 30	98	30	200	78	59	60 2 ±	35	48	28	~ 50
SD PLUS 90 / 40	90	40	200	77	48	80 2 ±	38	64	31
SD PLUS 90 / 36	90	36	200	79	51	72 2 ±	37	58	30
SD PLUS 80 / 30	80	30	230	91	53	60 2 ±	32	48	26
SD PLUS 75 / 36	75	36	230	90	46	72 2 ±	33	58	27	~ 45
SD PLUS 71 / 30	71	30	250	99	49	60 2 ±	30	48	24
SD PLUS 67 / 25	67	25	280	109	53	50 2 ±	27	40	21
SD PLUS 63 / 36	63	36	250	101	40	72 2 ±	29	58	24
SD PLUS 59 / 32	59	32	280	110	42	64 2 ±	27	52	22
SD PLUS 56 / 32	56	32	300	114	40	64 2 ±	26	52	21
SD PLUS 53 / 24	53	24	325	130	47	48 2 ±	23	38	18
SD PLUS 50 / 30	50	30	325	125	39	60 2 ±	23	48	19
SD PLUS 50 / 28	50	28	325	128	41	56 2 ±	23	45	19
SD PLUS 45 / 18	45	18	400	159	51	36 2 ±	17	29	16	~ 40
SD PLUS 40 / 25	40	25	400	154	38	50 2 ±	19	40	15	~ 40
SD PLUS 40 / 23	40	23	400	159	40	46 2 ±	19	37	15	~ 35
SD PLUS 35 / 16	35	16	500	196	47	32 2 ±	15	26	12
SD PLUS 32 / 18	32	18 uest.	500	200	41	36 2 ±	15	29	12

Specifications - BOPP SDS PLUS

Description	Open surface w pm	Wire diameter d pm	Mesh Per inch	Mesh Per cm	Open area A %	Thickness pm	Theoretical paint consumption cm³/m²	Thickness Calendaring Ovannaya pm	Theoretical consumption of calendaring paint cm³/m²	Recommended tension N / cm
SDS PLUS 85 / 25	85	25	230	91	60	50 2 ±	30	40	24	~ 30
SDS PLUS 72 / 20	72	20	275	109	61	40 2 ±	25	32	20
SDS PLUS 65 / 20	65	20	300	118	60	40 2 ±	23	32	19
SDS PLUS 62 / 16	62	16	325	128	63	32 2 ±	20	26	16
SDS PLUS 60 / 18	60	18	325	128	59	36 2 ±	21	29	17
SDS PLUS 56 / 22	56	22	320	128	52	44 2 ±	23	35	18
SDS PLUS 56 / 16	56	16	350	139	60	32 2 ±	19	26	16
SDS PLUS 48 / 16	48	16	400	156	56	32 2 ±	18	26	15
SDS PLUS 40 / 16	40	16	450	178	51	32 2 ±	16	26	13
SDS PLUS 25 / 15	25	15	635	250	39	30 2 ±	12	24	9

Specifications - BOPP SD XD

Description

Surface openness w pm

Diameter P wire oki d

Mesh

Per inch

Mesh

Per cm

Open area A %

Thickness

Theoretical paint consumption

cm³/m²

Recommended tension

N / cm

SD XD 50 / 30

325

125

78 3 ±

~ 35

Screen Mesh

Screen and silk screen metal mesh

Screen mesh production